Interior Wall Putty | Smooth Finish Wall Leveling Compound for Surface Preparation & Decoration

Interior Wall Putty | Smooth Finish Wall Leveling Compound for Surface Preparation & Decoration

NZ-100 high-strength, water-resistant interior wall putty is a dry powder compound made with special cement-calcium binders, fine fillers, and polymer additives. Mix with clean water to obtain a smooth, creamy mortar that levels uneven concrete, mortar, and gypsum surfaces, fills pinholes and micro-cracks, and creates a solid, uniform base for latex paint, wallpaper, and wall cloth. It is suitable for all indoor dry wall projects requiring reliable moisture and alkali resistance.

Send email to us >

Download

NZ-100 high-strength, water-resistant interior wall putty is a dry powder compound made with special cement-calcium binders, fine fillers, and polymer additives. Mix with clean water to obtain a smooth, creamy mortar that levels uneven concrete, mortar, and gypsum surfaces, fills pinholes and micro-cracks, and creates a solid, uniform base for latex paint, wallpaper, and wall cloth. It is suitable for all indoor dry wall projects requiring reliable moisture and alkali resistance.

NZ-100 provides high bonding strength to eliminate the risk of hollow peeling on concrete, plaster, and gypsum substrates. Its rigid, cured layer helps block micro-cracks in the substrate, while reliable 96-hour water resistance helps prevent alkali blooming and wall discoloration in humid indoor environments. A superfine powder ensures smooth troweling, easy sanding into a mirror-smooth base, and improved flatness for latex paint, wallpaper, and decorative wall coverings.

Non-toxic and odorless, the zero-formula complies with strict indoor environmental standards for homes, offices, and hotels. High water retention extends the working time, reducing premature drying during large-area construction. Apply using the thin, multi-coat principle to help prevent inner-dry surface cracking. A standardized 3:1 water mixing ratio supports consistent texture without random glue or cement adulteration.

ProtectionComplete construction workflow: remove loose residue → apply an interface agent → install anti-crack mesh → apply two or more thin putty coats → full curing for 24–48 hours → sand smooth → apply an alkali-resistant primer. For new plaster walls, the substrate must cure for at least 14 days, with moisture content below 10% and pH < 10 before application. Low long-term maintenance costs: a one-time, properly applied putty base helps keep wall decoration intact for years without blistering or fading.