Why need buy small simple dry mortar production line?
1. Mixing fast: 6-8 minutes per batch, 1-8 ton per batch, high output.
2. Multifunction: can produce insulation mortar, wall putty, tile adhesive, plaste and so on.
3. New product: big market bring huge profit.
4. Easy installation, easy operation, low space.
5. Low maintenance: its bearings at both end of the ribbon mixer, the material not easy to enter.
6. Mixing evently: no dead mixing horizontal structure.
|
Introduction |
|
Simple tile adhesive mixer is horizontal spiral ribbon mixer, has three layer inside and outside |
|
Horizontal mixer tank is equipped with a moving door to easy to clear up, Can be made of carbon steel, stainless steel, stainless steel mixer according to customer required. |
|
Conveyor can fast moving material, save mixing time:6-8minutes per batch. |
|
Automatic weighing and packing machine: 5-8seconds/bag. weight of bag:10kg-50kg,open mouth or valve port can do. |
|
Note |
|
For the first time to use this machine, mixer machine must be add grease oil to reducer |
|
For this ribbon mixer machine, it need while feeding raw material while mixing, when feeding over, then also about 5-8minutes will be high evenness, when discharging finished material, please not open fully for discharging door, if open fully, maybe it will be easy block the second screw conveyor. |
|
Please clean the mixer machine use the air tube when work finished every time. |
Dry mortar, also known as pre-mixed mortar,which made in the factory by precise batching and uniform mixing.
It can be used directly just by adding water in construction site. It has different properties though adding different additives.
1.Bonding Mortar: Masonry mortar, wall(ceramic) and floor tile adhesive mortar etc.
2.Decoration Mortar : Decorative plaster, inner and outer wall putty, colorful decoration mortar etc.
3.Protection Mortar : Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildew-proof mortar ect.
Comment from customer：
FAQ:
1. What is the area occupied?
A: A complete simple 5 ton per hour line is about 20 m2 and height is less than 1 meters
2. How about the power consumption?
A: For 2ton/h line,that need 80-100Kwh for 8 hours,for 4ton/h line,it need 120-140Kwh for 8 hours.for 5ton/h line,it need about 220-240Kwh for 8 hours
3. Weather can choose the packaging machine?
A: Of course,we have simple packing machine and automatic packing machine(automatic weighing and automatic packing).we can do valve port and open port packaging machine according to your bag
4. How about the investment of this project?
A: Our engineer can design the dry mortar plant as your requirement and your budget, different tpye dry mortar plant investment are difference. Low capacity low cost, we will provide you cost effective solution as your requirement.
5. What's the difference between full automatic dry mortar plant and Semi-automatic dry mortar plant?
(1) Semi-automatic dry mortar plant is Cheaper than full automatic dry mortar plant.
(2) Semi-automatic dry mortar plant do not need to equip material silos while full automatic type equip silos.
(3) Semi-automatic dry mortar plant is manual feeding and automatic weighing and packaging, full automatic type can realize automatic feeding and packaging.
6. How many person required to operate this dry mortar plant?
A: Usually 2-3 workers are enough to operate this dry mortar plant.
7. What equipment and service you can provide?
A: We can provide you turnkey solution of dry mortar plant from working site planning to dry mortar machines, transportation, installation and training, formula of dry mortars, after sales services, life time techincal support etc.
8.What is the garantee period?
A: 12 months, with in this period we provide you technical services for free.
9.Can you install the dry mortar plant in my country?
A: Yes, we will send engineers to your country for guiding installation and training your workers to operate the machine.
