Fully automatic dry mix mortar plant mainly suitable for capacity of more than 30 tons per hour.
The automatic dry mix mortar plant has simple design, small footprint, small investment, quick effect, continuous production and high output. The double-shaft paddle mixer not destroys the original state of the material, ensuring that the coefficient of the dry powder is not reduced due to the shape damage of the heat-insulating material, ensuring the quality of the product. Suitable for medium and small-scale manufacturers, equipped with automatic packaging system, one-button control of all equipment.
Other Four Types Of Dry Mortar Production Line On Sale :
A： Simple dry mix mortar production line
Simple dry mortar mix production line, mainly suitable for dry mortar mix production lines with an output of less than 8 T/H.
Simple dry mortar mix production line mainly including feeding screw conveyor, ribbon mortar mixer, discharge screw conveyor, finished product bin, automatic valve weighing packing machine, air compressor, electric control cabinet, etc.
Features of simple dry mix mortar production line:
I. Additionally equipped with secondary screw conveying system, finished product storage silo, automatic packing machine based on multi spiral ribbon mixer, to composed an efficient and reasonable simple dry powder mortar mixer with low cost.
II. Occupation Area<20m2, Height <3.5m, its capacity at 25-30t per day, just only need 2-3 person,very easy to operate.
III. It can realize Automatic Conveying Material, Automatic Mixing, Automatic Filling and Automatic Packing, high efficiency and low cost, wihch is the priority selection of small and medium dry mortar factory.
B: Semi automatic dry mix mortar production line
Semi automatic dry mix mortar production line mainly suitable for capacity at 10-15t/h or 20-30t/h (standard plant), According to the customer's request, different configurations have different prices.
Features of semi automatic dry mix mortar production line:
Small investment, suitable for small and medium-sized enterprises to invest and build factories;
Small footprint, installation height of about 6.5 meters, suitable for customers with limited plant height;
The operation is convenient, 1-2 people can operate production;
High output, with high-efficiency valve port automatic weighing packaging machine, the output is 10-15t/h or 20-30t/h (depending on the configurations of dry mortar production line)
C. Thermal insulation mortar production line
The automatic inorganic thermal insulation mortar production line （Glass Bubbles Production Line）has an annual output of 20,000 cubic meters. Under normal circumstances, 4-6 raw material tanks will be used. Two large tanks are used for loading bulk cement and fly ash, and the remaining small tanks are used for loading and unloading. Light calcium, heavy calcium, sand, additive materials, etc. The weighed material is fed into the bucket lifter through the screw conveyor and lifted to the upper part of the mixer to be mixed. The pre mixed hopper is a pneumatic large opening type, and the material to be mixed can be quickly put into a gravity-free mixing machine to realize continuous production of dry powder thermal insulation mortar.
D. Thermoplastic Road Marking Paint Production Line
Thermoplastic Road Marking Paint Production Line is a special set of hot melt reflective road marking paint mixing equipment, which belongs to an integrated machine that integrates feeding, mixing, quantitative packaging and sewing. The equipment is divided into single type and production line type. The single road making paint production line consists of ribbon mixer and packing machine. The road marking paint production line is consists of raw material hopper, weighing system, hoisting system, mortar mixer, packaging machine and dust collector. Customers can order the right mixing equipment according to the output.
This ceramic tile adhesive mortar equipment composed by mixing system, batching system, raw material storage system,electric control system, dedust system, packing system and so on. Details parts as following:
a. Instead of the traditional chain transmission device, extend using life for more than 2-3 years.
b. Specially sealed design: dust will never enter the bearing.
c. Material is wear resistant manganese steel, more strength and it adopts the adjustable detachable design.
d. 4 cylinders control the host feeding door at the same time
1. Different types have different capacity: 30 T, 50 T, 80 T, 100 T, 150 T, 120 T, 200 T, 300 T etc.
2. Customized sizing and layout to specific requirement Sub-structure, easy transportation, installation fast, level display, with positive and negative regulator,Green filter.
3. Put in bulk powder (cement or fly ash), waterproof and moisture, easy to use and reduce costs , the top of cement silo with green filter, used to reduce dust leakage.
4. Equipped with a safety valve at the top of cement silo, cement silo used to balance the pressure difference between inside and outside.
The pulse dust collector is a new type of pulse dust removal equipment improved on the basis of the bag filter. It improves the dust collection efficiency, adaptability and prolongs the service life of the filter bag. The small pulse dust collector can be widely used in the asphalt mixing plant to break. Dust collection system for dust and soot in mills, dryers, furnaces and kiln.
With plant operation diagram on the control panel.
Various kinds of formulation can be set.
Automatically control batching,weighing, mixing.
Display screen,show the whole working process dynamically.
