The automatic inorganic thermal insulation mortar production line （Glass Bubbles Production Line）has an annual output of 20,000 cubic meters. Under normal circumstances, 4-6 raw material tanks will be used. Two large tanks are used for loading bulk cement and fly ash, and the remaining small tanks are used for loading and unloading. Light calcium, heavy calcium, sand, additive materials, etc. The weighed material is fed into the bucket lifter through the screw conveyor and lifted to the upper part of the mixer to be mixed. The pre mixed hopper is a pneumatic large opening type, and the material to be mixed can be quickly put into a gravity-free mixing machine to realize continuous production of dry powder thermal insulation mortar.
Other Four Types Of Dry Mortar Production Line On Sale :
A： Simple dry mix mortar production line
Simple dry mortar mix production line, mainly suitable for dry mortar mix production lines with an output of less than 8 T/H.
Simple dry mortar mix production line mainly including feeding screw conveyor, ribbon mortar mixer, discharge screw conveyor, finished product bin, automatic valve weighing packing machine, air compressor, electric control cabinet, etc.
Features of simple dry mix mortar production line:
I. Additionally equipped with secondary screw conveying system, finished product storage silo, automatic packing machine based on multi spiral ribbon mixer, to composed an efficient and reasonable simple dry powder mortar mixer with low cost.
II. Occupation Area<20m2, Height <3.5m, its capacity at 25-30t per day, just only need 2-3 person,very easy to operate.
III. It can realize Automatic Conveying Material, Automatic Mixing, Automatic Filling and Automatic Packing, high efficiency and low cost, wihch is the priority selection of small and medium dry mortar factory.
B: Semi automatic dry mix mortar production line
Semi automatic dry mix mortar production line mainly suitable for capacity at 10-15t/h or 20-30t/h (standard plant), According to the customer's request, different configurations have different prices.
Features of semi automatic dry mix mortar production line:
Small investment, suitable for small and medium-sized enterprises to invest and build factories;
Small footprint, installation height of about 6.5 meters, suitable for customers with limited plant height;
The operation is convenient, 1-2 people can operate production;
High output, with high-efficiency valve port automatic weighing packaging machine, the output is 10-15t/h or 20-30t/h (depending on the configurations of dry mortar production line)
C. Full automatic dry mix mortar plant
Fully automatic dry mix mortar plant mainly suitable for capacity of more than 30 tons per hour.
The automatic dry mix mortar plant has simple design, small footprint, small investment, quick effect, continuous production and high output. The double-shaft paddle mixer not destroys the original state of the material, ensuring that the coefficient of the dry powder is not reduced due to the shape damage of the heat-insulating material, ensuring the quality of the product. Suitable for medium and small-scale manufacturers, equipped with automatic packaging system, one-button control of all equipment.
D. Thermoplastic Road Marking Paint Production Line
Thermoplastic Road Marking Paint Production Line is a special set of hot melt reflective road marking paint mixing equipment, which belongs to an integrated machine that integrates feeding, mixing, quantitative packaging and sewing. The equipment is divided into single type and production line type. The single road making paint production line consists of ribbon mixer and packing machine. The road marking paint production line is consists of raw material hopper, weighing system, hoisting system, mortar mixer, packaging machine and dust collector. Customers can order the right mixing equipment according to the output.
The automatic inorganic thermal insulation mortar equipment is mainly composed of hoist, premixed warehouse, small silo, mixer, finished product warehouse, packaging machine, dust collector, electric control cabinet and gas phase balance system. The double-shaft paddle high-efficiency mixer and the inorganic thermal insulation mortar mixer are used to prevent the original state of the material, ensuring that the thermal insulation coefficient of the mortar is not reduced due to the shape damage of the thermal insulation material, ensuring the thermal insulation effect of the product.
Semi-automatic inorganic thermal insulation mortar equipment
The semi-automatic inorganic thermal insulation mortar equipment is a production system with high-tech content for the production of vitrified micro-bead inorganic thermal insulation mortar. The complete equipment has specially improved the equipment for the fragile characteristics of the vitrified microbeads during the stirring process, which greatly reduces the breaking rate of the vitrified microbeads, and the whole set of equipment is simple to operate, the mixing uniformity is high, and no The advantages of residue, good sealing and small dust have greatly saved manpower and material resources while increasing production.
Semi-automatic inorganic thermal insulation mortar equipment mixing system
The mixing system of the complete production equipment adopts a drum mixer to prevent breakage of vitrified beads, large-capacity mixing chamber, short mixing time, high output, high uniformity, no residue, no breakage. The uniformity of the secondary mixing material of the finished product bin (saturator) is kept at the same time, and the material is smoothly entered into the packaging system. The smoothing device adopts a vulgar smoothing device to reduce the speed, improve the efficiency and protect the quality.
Semi-automatic inorganic thermal insulation mortar lifting conveyor system
The lifting conveyor used in this project is a bucket elevator, which can effectively protect the solubility standard of vitrified beads and improve the lifting speed.
Semi-automatic inorganic thermal insulation mortar equipment dust removal system
The whole set of equipment is completely sealed without dust leakage. The multi-point pulse type dust collector is used to collect the dust of the feeding port and the discharging port to prevent waste of resources, optimize the working environment and ensure the health of the employees.
